NUX NBP-5 Melvin Lee Davis Bass Preamp Pedal Effects - Black
- Brand: NUX
- Product Code: NBP-5
- Availability: In Stock
-
AED 659.00
MLD signature Bass Preamp + DI features fully
sweepable mid-range frequencies in addition to Bass and Treble controls. Melvin
L. Davis is proficient at 4, 5, 6 and 7 string basses, so MLD Bass Preamp has a
wide range of frequency control.
Volume Knob
Adjusts the overall output volume of the pedal.
Ideal for fine-tuning the output on clean tone, it also controls the DI output
volume.
Blend Knob
Adjusts to blend between the clean signal and
overdrive signal. The clean signal remains as unity gain, allowing for fine
control of the blend ration.
Drive Knob
Adjusts the Gain level and sets the saturation
level in the overdriven signal.
3-Band Equalizer with Middle Frequency Selector
Bass: +/- 12dB @40Hz
Middle: +/- 17dB @160Hz to 1000Hz
Freq.: 160Hz ~ 1000Hz
Treble: +/- 12dB @8000Hz
DI Output
Balanced XLR Output carrying the mic-level
output signal, either affected or unaffected depending on the postswitch.
GND LFT (Ground / Lift) Toggle
Switch
Disconnects the signal ground on the DI out to
break any ground loops. Toggle the switch to the LESS noisy position; it can be
either GND or LFT depending on the room, stage or studio condition. Switch does
not effect the 1/4-inch (6.5mm) output.
Impulse Response (IR) Toggle
Switches
You can activate/deactivate the IR cabinet
simulation for both DI out and 1/4-inch (6.5mm) out separately. Use the
appropriate IR toggle switch to turn ON/OFF the emulation for the output you
choose.
Main OUT and Through
You can use the main "OUT" and
"THROUGH" output to get the dry signal for bass amplifier
connection. When you activate the "OUT IR" cabinet simulation,
you can connect the pedal to any FRFR speaker, directly to a mixer or audio
interface. "THROUGH" output will remain bypassed either the "OUT
IR" is activated or deactivated.
DI Out, Auxiliary Input and
Headphone Output
On the LEFT SIDE of the PEDAL, you can access
the XLR output for a mixer and/or audio interface connection, and you have the
option of activating the IR cabinet simulation. There is a 1/8-inch
(3.5mm) auxiliary input to connect a music player, and headphones output for
silent practicing or monitoring (please check the USB
connection). Headphone output is related to DI out, when you activate the
DI IR simulation, headphones output will be simulated.
Firmware V3 & NBP-5 Edit
Software
You can connect the pedal to your Windows / MAC
computer to use the edit software: load your own IR files and control various
other settings. Supported IR file: 48 kHz / 24-bit, 1024 Samples
Recording With Melvin Lee Davis Bass
Preamp
You can record your bass guitar without using
any audio interface. MLD Bass Preamp + DI has a built-in audio streaming
function, so you can connect the pedal directly to your computer with a Micro B
USB cable, and it is ready to play and record. A driver-free* solution helps
you produce music with direct connection. You can use the headphones output for
monitoring, you will hear both your guitar and the audio from your computer.
PLEASE NOTE: Run the audio recording software
first, then run the MLD Bass Preamp Editor Software to use it properly.
Specifications
- 24-bit, 48KHz
- Impulse Response: 1024 length (20.33ms)
- Latency: 1ms
- 3-band EQ with Middle-frequency selector
- Drive with blend control
- Built-in noise reduction
- Impulse Response loader, speaker cabinet
simulation
- 1/4" instrument input
- 1/4" through output and main output
- XLR DI output
- 1/8" headphone output
- 1/8" Auxillary in for music player
connection
- Micro B USB input for firmware update,
software control, IR loading, and audio stream